A valid RSA ID documentDescription
AIRMAKS CAIMAN X LAMINATE GREEN PCP 5.5MM
The regulated AirMaks Caiman X Laminate Green PCP 5.5mm is light, compact, powerful, as well as insanely accurate! This model from Czech manufacturer AirMaks Arms features a 520mm CZ barrel with 1/17,7 twist rate. Therefore, it is a bit more powerful than the standard Caiman. The beautiful, well finished green laminated stock also gives it a unique look!
Shooting and aiming is really comfortable, thanks to its ergonomically shaped pistol grip. You can also adjust the rubber buttpad in height for increased comfort. The CZ barrel is 520 mm long and the compact Bullpup design allows this rifle to have an overall length of only 695 mm. With a twist rate of 1/17,7 you can be sure this choked barrel delivers accuracy! The muzzle is outfitted with an integrated, modular sound moderator, which makes shooting a silent affair.
The cocking lever is placed on the left side, but you can easily swap it to the right side. It’s two-stage trigger is adjustable, while the magazine has a capacity of 10 pellets in .22 caliber. It’s manual safety is located near the end of the buttstock. To disengage it, simply push it from the right side of the rifle.
The air cylinder has a capacity of 285 cc with a maximum filling pressure of 300 bar. The pressure gauge is placed on the left side of the foregrip. AirMaks’ Caiman X comes with a bunch of goodies, which we’ve listed on the bottom of this page. This model is equipped with a 20MOA 22 mm Picatinny / Weaver rail to fit optics, instead of conventional iron sights. The UIT rail (or T-rail) on the foregrip will allow you to attach a bipod or torch.
Shooting Performance
As all hardened airgunners will tell you, shooting specs are not always a straight-forward affair. This rifle usually comes with the regulator set at 100 BAR. So we’ll base the information on 300 BAR to 100 BAR shot strings, which is a single fill from full to reg pressure.
The Caiman X will produce velocities at stock standard settings, of 910fps at most to an average of 875fps. These velocities are with JSB 18.13 grain lead pellets. Of course, it features externally adjustable hammer spring adjustment, so you can increase / decrease the velocity as preferred.
From the factory, you can get 119 shots per fill, at about 32ft.lbs average over those shots for closer range work. Otherwise, you can get 60 consistent powerful shots for distances from 50m to 100m, at about 35ft.lbs.
See a complete review here, done for Utah Airguns by Airgun Exploration & Advancement Channel (AEAC Vlog)
SPECIFICATIONS
Calibre: 5.5 mm (.22 cal)
Velocity: 875 – 910fps standard (with JSB 18.13gr, 100BAR regulator setting. Externally Adjustable to increase velocity)
Energy: 32 – 35ft.lbs standard (100BAR regulator setting. Externally Adjustable to increase power)
Regulated: Yes
Magazine: 10-Shot Removable
Air Tube Capacity: 285cc
Fill Pressure: 300BAR / 4350 psi
Shots per Fill: Up to 119 from 300BAR to 100BAR (100BAR reg pressure, 32ft.lbs. Depending on hammer setting)
Stock: Green Laminate, Ambidextrous
Overall Length: 695mm
Barrel Type: CZ
Length of Barrel: 520mm, Fully Shrouded & Baffled, Chocked
Twist Rate: 1/17,7
Average Weight: 3.05kg
Optics Rail: 20 MOA Picatinny
Accessories Rail: UIT Rail
Buttplate: Rubber, height adjustable
Cocking: Side lever action, right-left changeable
Trigger: Adjustable 2-stage
Safety: Manual
Grip: Ergonomically shaped pistol grip, ambidextrous
Supplied With:
2 x 10-Shot Magazines
Filling Device with Fill Nipple
Padded Rifle Bag Case
Discharge Tool
Spare seals for Fill Nipple
Packet Felt Pads
* Refer to the product manual before attempting to make adjustments to hammer spring. Any additional optics, cylinders, pellets or other accessories not included and for illustrative purposes only.
Reviews
There are no reviews yet.